2010 Ford Focus
Mileage
141,082
Service Date
10/19/2022
Services Performed
- Technician verified customer concern vehicle sputtering Technician found that the spark plug was installed improperly and ignition coil was not installed properly causing spark to go through the oil pressure switch which blew it out *Recommend replacement of one coil and one spark plug and recheck possible oil pressure switch and connector will have to check after repairing the spark plug and coil
- SPARK PLUGS – Remove & Inspect, & Replace, ONE
- Technician found when trying to install the new spark plug and ignition coil that the threads for cylinder #3 had no thread left Technician believes that the spark plugs were over torqued causing the threads to blow out Technician recommends replacement of cylinder head but as a quick solution can try and repair spark plug hole no warranty that the cylinder head will hold after spark plug hole is repaired If problem persist the vehicle will need a new cylinder head
- After spark plug hole repair performed a compression test and found that the vehicle had the following: Cylinder #1: 170 PSI Cylinder #2: 165 PSI Cylinder #3: 165 PSI Cylinder #4: 165 PSI Per vehicle specifications found that the engine is in good working condition no other concerns found at this time
RYAN M. gave our service a 5 star review on 10/24/2022
